|
|
|
| |
|
|
| 本文已被：浏览 191次 下载 168次 |
码上扫一扫！ |
|
|
| 正态分布焊接热源集中系数的确定和研究 |
|
路登平, 李义丹, 司树恒, 赵家瑞, 胡吉安
|
|
天津大学
|
|
| 摘要: |
| 本文利用有限厚度无限大平板的三维焊接温度场计算公式,通过最小二乘法使计算的热循环曲线与实际的热循环曲线最佳逼近,推导出了焊接热源集中系数K的新的试验-计算方法。实践表明,这种方法不但简单、可靠,而且实验条件也不苛刻。本文还建立了给定规范下焊接热源集中系数K与焊接电流的关系曲线,并对曲线进行了分析。 |
| 关键词: |
| DOI： |
| 分类号: |
| 基金项目: |
|
| THE DETERMINATION OF NORMAL DISTRIBUTION CONCENTRATION FACTOR FOR HEAT SOURCE OF WELDING |
|
Lu Dengping, Li Yidan, Si Shuheng, Zhao Jiarui, Hu Jian
|
|
Tianjin University
|
| Abstract: |
| In this paper,by the use of the formula for 3-dimensional temperature field of welding on unlimited plate of limited thickness and by the use of the method of least square,the authors get a best approach for the calculated thermal cycle curve to the actual one.A new "test and calculate" method is deduced for the determination of the concentration factor K for heat source of welding.It is simple and reliable,and involves no severe condition for experiment.A curve showing the relation between K and welding current under given specifications is established and supplemented with analysis. |
| Key words: |
|
|
|
|
