|
|
|
本文已被:浏览 358次 下载 222次 |
 码上扫一扫! |
|
国产X70管线钢的硫化氢应力腐蚀性能及其焊接性 |
杜则裕1, 陶勇寅1,2, 李云涛1, 李建军2
|
1.天津大学 材料科学与工程学院, 天津 300072;2.河北石油技术学院, 河北 廊坊 065000
|
|
摘要: |
针对在含H2S的介质中,不同成分条件的国产管线钢H2S应力腐蚀开裂(Sulfide stress corrosion cracking,SSCC)性能、焊接性分别采用恒载荷法及插销试验法进行了研究;对插销试样断口进行了电子显微镜分析。试验结果表明,不同C、Mn、P含量的国产X70管线钢在相同的试验条件下具有不同的SSCC断裂时间与断裂应力。其原因主要是由于它们的Mn、P元素含量的不同引起的,而不是C元素;采用LINCOLNE6010焊条,预热70℃时的临界应力σcr=630 MPa,不预热时的σcr=610 MPa,即预热可以使国产X70管线钢的临界应力明显提高;插销试样的断口形貌是由解理断裂、准解理断裂和韧窝断裂构成的混合型断口。 |
关键词: 国产X70管线钢 硫化物应力腐蚀开裂 合金元素 焊接性 插销试验 |
DOI: |
分类号: |
基金项目: |
|
Sulfide stress corrosion cracking and weldability of domestic X70 pipeline steels |
DU Ze-yu1, TAO Yong-yin1,2, LI Yun-tao1, LI Jian-jun2
|
1.School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;2.Hebei Institute of Petroleum and Technology, Hebei Langfang 065000, China
|
Abstract: |
Constant load test and implant test were utilized to study the sulfide stress corrosion cracking (SSCC) in the sulfide solution and weldability of domestic X70 pipeline steels. Electronic microscopic testing was used to analysis the fracture morphology in implant tests. The results suggested that it is element Mn, P, not element C that lead to domestic X70 pipeline steels with different chemical compositions have different resistance to SSCC. The σcr (critieal stress) of the joint produced by LINCOLN E6010 welding rod is 630 MPa, 610 MPa with preheating(70℃) or without preheating respectively. The appearance of implant fracture is charaterized by civility, permit cleavage and cleavage. |
Key words: domestic X70 pipeline steels sulfide stress corrosion cracking alloying element weldability implant test |
|
|
|
|