| 本文已被：浏览 156次 下载 184次 |
码上扫一扫！ |
|
|
| 400MPa级超级钢焊接热影响区晶粒尺寸的预测 |
|
赵洪运1,2, 王国栋1, 李冬青3, 刘相华1, 杜林秀1
|
|
1.东北大学轧制技术及连轧自动化国家重点实验室, 沈阳 110004;2.长春工业大学材料科学与工程学院, 长春 130012;3.哈尔滨工业大学材料科学与工程学院, 哈尔滨 150001
|
|
| 摘要: |
| 应用有限元方法建立了超级钢焊接温度场的数学模型,对5 mm厚、400 MPa超级钢等离子弧焊接温度场和热循环进行了模拟和分析;利用模拟得到的热影响区热循环曲线,根据晶粒长大动力学原理对热影响区晶粒尺寸进行预测。预测结果表明,焊接接头热影响区宽度约为6.5 mm;焊接接头热影响区晶粒明显长大,最大晶粒尺寸约为180μm;焊接接头热影响区晶粒随冷却速度的加快而细化,但细化程度有限。 |
| 关键词: 超级钢 热循环曲线 焊接热影响区 晶粒尺寸 |
| DOI： |
| 分类号: |
| 基金项目:国家863计划项目(2001AA332020);吉林省自然科学基金资助项目(20040541) |
|
| Prediction of grain size in the HAZ of the ultra fine grain steel joint |
|
ZHAO Hong-yun1,2, WANG Guo-dong1, LI Dong-qing3, LIU Xiang-hua1, DU Lin-xiu1
|
|
1.State Key Lab Rolling and Automation, Northeastern University, Shenyang 110004, China;2.School of Materials Science and Engineering, Changchun University of Technology, Changchun 130012, China;3.School of Material Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
|
| Abstract: |
| The welding temperature field of the ultrafine grain steel was computer simulated in this paper,and the thermal cycle curve was obtained.The grain size in HAZ was predicted based on the thermal cycle curve.The outcome of the prediction was in accordance with the outcome of the experiment.The heat affected zone(HAZ) is one of the main areas which affect the properties of welds.It is essential meaningful to complete the prediction of grain size by computer using proper methods and that can provide a new and important foundation for optimizing welding parameters and improving the quality of welds.The result showed that:(1) The width of the HAZ was about 6.5 mm;(2) The grain size in HAZ increased obviously and the largest was 180 μm;(3) The higher the cooling speed was,the more refined the grain was,but the refined extent was relatively limited,not obvious. |
| Key words: ultrafine grain steel thermal cycle curve HAZ grain size |
