引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 214次   下载 230 本文二维码信息
码上扫一扫!
分享到: 微信 更多
等离子喷涂过程中粒子的氧化及其对涂层性能的影响
魏琪, 张林伟, 李辉, 崔丽
北京工业大学材料科学与工程学院, 北京 100124
摘要:
利用粒子收集装置和附加氩气保护罩,研究了铁粒子和NiCoCrAlY粒子在等离子喷涂过程中的氧化行为及其对涂层性能的影响.结果表明,粒子在飞行过程中存在对流氧化和扩散氧化两种氧化机制,粒子的氧化方式取决于离开喷嘴的距离;离开喷嘴距离越长,粒子氧化越严重;采用附加氩气保护罩能明显减少喷涂过程中外界空气对粒子的氧化,降低涂层孔隙率,提高NiCoCrAlY涂层的抗高温氧化性能.
关键词:  等离子喷涂  金属粒子  氧化机理  抗氧化性能
DOI:
分类号:
基金项目:北京市教委科技发展资助项目(KM200610005026,JP009012200803);北京工业大学博士启动基金项目(52009999200701)
Oxidation of metallic particle and its effect on properties of plasma sprayed coatings
WEI Qi, ZHANG Linwei, LI Hui, CUI Li
College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
Abstract:
The oxidation mechanisms of iron particles and NiCoCrAlY particles during plasma spraying process and its effect on the sprayed coatings were investigated by the in-flight particles collection setup and the gas shrouding.The results show that there are two oxidation mechanisms during in-flight oxidation: one is the diffusion oxidation;the other is the convective oxidation, which are decided by the distance from the spraying particles to the nozzle.The oxidation content increases with the increasing of the standoff distance.The shrouded gas can decrease the oxidation content of in-flight particles and increase the oxidation resistance of NiCoCrAlY coatings.
Key words:  plasma spraying  metallic particle  oxidation mechanism  oxidation resistance