QFP结构微焊点强度的试验

胡永芳; 薛松柏; 禹胜林

引用本文:

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 179次下载 199次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
QFP结构微焊点强度的试验
胡永芳¹, 薛松柏¹, 禹胜林²
1.南京航空航天大学材料科学与技术学院, 南京 210016;2.中国电子科技集团第十四研究所, 南京 210013

摘要:

采用微焊点强度测试仪(STR-1000型)测试了方形扁平式封装器件(QFP)的抗拉强度,并对不同间距、不同钎料成分的QFP和SOP结构焊点进行了比较。研究结果表明,在相同的钎料成分下,焊脚间距越大,所需的抗拉力越大,抗拉强度越高;共晶钎料QFP焊点的抗拉强度比纯铅的抗拉强度低,QFP焊点的结合强度比钎料自身的抗拉强度高。

关键词: 抗拉强度方形扁平式封装器件(QFP) 共晶钎料

DOI：

分类号:

基金项目:

Study on strength of soldered micro-joints of QFP devices

HU Yong-fang¹, XUE Song-bai¹, YU Sheng-lin²

1.College of Materials Science & Technology, Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China;2.14th Research Insitute, China Eletronics Technology Group Corporation, Nanjing 210013, China

Abstract:

Tensile strength of the quad flat pack(QFP) devices were determined by STR-1000 Joint Strength Tester and compared with the joints soldered with different pitches and different solder compositions QFP and SOP(small outline package).The results indicate that for the same solder compositions,the wider the pitch is,the larger the pulling force is,i.e.the higher the tensile strength is.The tensile strength of soldered joints of QFP with pure lead is higher than that of eutectic solder and as well and as higher than that of eutectic solder itself.

Key words: tensile strength quad flat pack(QFP) eutectic solder