| 本文已被：浏览 364次 下载 244次 |
码上扫一扫！ |
|
|
| 重力对全位置TIG焊熔池温度场与流场影响的有限元分析 |
|
刘文吉1,2, 李亮玉1,2, 岳建锋1,2, 王天琪1
|
|
1.天津工业大学 天津市现代机电装备技术重点实验室, 天津 300087;2.哈尔滨工业大学 先进焊接与连接国家重点实验室, 哈尔滨 150001
|
|
| 摘要: |
| 建立了全位置TIG焊接中平焊、45°下向焊、立焊下向焊的熔池温度场、流场数值计算模型,计算了不同焊接位置以及不同重力加速度值情况下熔池的温度场和流场,分析了重力方向和大小对熔池内流场和温度场的影响规律;发现重力方向对熔池内液态金属的流场、温度场影响明显,液态金属的流动影响温度场分布明显,重力大小对熔池流场的分布形态没有影响,但是对流动速度影响明显. 得到的结论对于研究熔池失稳判定依据、指导设计全位置TIG焊乃至MAG焊工艺具有一定的参考价值. |
| 关键词: 全位置焊接 重力 有限元 温度场 |
| DOI： |
| 分类号: |
| 基金项目:国家自然科学基金资助项目(U1333128);哈尔滨工业大学先进焊接与连接国家重点实验室基金资助项目(AWJ-M13-08) |
|
| Effects of gravity on temperature field and fluid flow distribution of all-position TIG welding using finite element method |
|
LIU Wenji1,2, LI Liangyu1,2, YUE Jianfeng1,2, WANG Tianqi1
|
|
1.Tianjin Key Laboratory of Modern Mechatronics Equipment Technology, Tianjin Polytechnic University, Tianjin 300160, China;2.State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
|
| Abstract: |
| Numerical model of temperature field and fluid flow field was built to study the effects of gravity on different welding positions and different gravity values. Temperature field and fluid flow field of flat position, 45° position and 90° position with downward speed were calculated, respectively. The results showed that fluid flow of 90° position was far more intense than the one of flat position, which affected the temperature distribution and caused molten metal flowing downward. The presence of gravity had no influence on fluid flow distribution morphology, but affected the flowing speed significantly. Conclusions of this study can be used on the research of welding pool instability judgment basis and deciding parameters of all position TIG or MAG welding. |
| Key words: all-position welding gravity finite element method temperature field |
